Garmin CIRRUS PERSPECTIVE TOUCH+ - Flight Management; Navigation Data; USING MAP Displays; Map Settings Synchronization

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 33
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
FLIGHT MANAGEMENT
NAVIGATION DATA
Changing a field in the MFW Navigation Data Bar:
1) From MFW Home, touch Utilities > Setup > Avionics Settings.
2) Touch the MFD Fields Tab.
3) Touch the desired MFD Data Bar Field button. The respective 'Select MFD Data Bar Field'
Screen will open.
4) Scroll as required and touch the desired field description to replace the previous
information.
5) Repeat Steps 3 and 4, as necessary.
USING MAP DISPLAYS
Viewing the map settings:
1) From MFW Home, touch Map.
2) Touch the Map Selection Button, if necessary. This button is only available if IFR/VFR
charts are installed.
3) Touch the Map Settings Button. The 'Map Settings' Screen is displayed.
Or:
1) From MFW Home, touch Flight Plan.
2) Touch the Flight Plan Options Button.
3) Touch the Map Settings Button. The 'Map Settings' Screen is displayed.
MAP SETTINGS SYNCHRONIZATION
Enabling/disabling map settings synchronization:
1) From MFW Home, touch Map > Map Selection > Map Settings > Map Sync.
2) Touch the Onside Button or the All Button.
3) Touch the button for the desired setting.
Or:
Touch the Off Button to disable synchronization.
MAP ORIENTATION
Changing the map display orientation:
1) From MFW Home, touch Map > Map Selection > Map Settings.
2) Touch the Orientation Button.
3) Touch the Heading Up, Track Up, or North Up Button to select the orientation.