Garmin CIRRUS PERSPECTIVE TOUCH+ - Direct-To Navigation

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 49
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Viewing Flight Plan Legs for the active flight plan:
1) From MFW Home, touch Flight Plan Information > Flight Plan Legs.
Or:
From MFW Home, touch Flight Plan > Flight Plan Options > Display FPL Legs.
2) Push either knob to activate the scrolling function on the 'Active Flight Plan' Pane.
3) Turn the upper knobs to scroll the 'Active Flight Plan' Pane.
4) Touch the Display FPL Legs Button again (if previously used) to remove the 'Active
Flight Plan' Pane from the display.
Viewing historical flight plan data:
1) From MFW Home, touch Flight Plan Information > Flight Plan History.
2) Push either knob to activate the scrolling function.
3) Turn the upper knobs to scroll the 'Flight Plan History' Pane.
Deleting flight plan history:
1) From MFW Home, touch Flight Plan Information > Flight Plan History > Delete
Flight Plan History.
2) Touch the OK Button in response to the question, 'Clear current waypoints from the flight
plan history?'.
DIRECT-TO NAVIGATION
Selecting a nearby airport as a direct-to destination:
1) From MFW Home, touch Nearest > Airport.
2) Touch a Nearest Airport Button to display the 'Waypoint Options' Window. If desired,
highlight the airport on the active display pane by touching the Show On Map Button.
3) Touch the ¯ Button to choose the waypoint as the direct-to destination, and display
the 'Direct To' Screen.
4) To activate direct-to navigation:
Touch the Activate ¯ Button to activate the direct-to.
Or:
a) Touch the Activate and Insert in Flight Plan Button or the Insert in Flight Plan
Button (only available if the selected waypoint is not in the flight plan) to display the
'Insert and Activate ¯ <waypoint> Before?' Window.
b) Touch the Waypoint Selection Button to select the flight plan location to insert the
direct to waypoint, and to activate the direct-to.
Selecting any waypoint as a direct-to destination:
1) Select the screen containing the desired waypoint and select the desired waypoint.
2) If necessary, touch the Waypoint Options Button.