Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 76

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
50
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
3) Touch the ¯ Button to choose the waypoint as the direct-to destination, and display
the 'Direct To' Screen.
4) To activate direct-to navigation:
Touch the Activate ¯ Button to activate the direct-to.
Or:
a) Touch the Activate and Insert in Flight Plan Button or the Insert in Flight Plan
Button (only available if the selected waypoint is not in the flight plan) to display the
'Insert and Activate ¯ <waypoint> Before?' Window.
b) Touch the Waypoint Selection Button to select the flight plan location to insert the
direct to waypoint, and to activate the direct-to.
Selecting a waypoint as the direct-to destination by identifier, facility, or city name:
1) From MFW Home, touch ¯ on the Button Bar.
2) Touch the Waypoint Selection Button to display the keypad (available waypoints in flight
plan).
Or:
Touch the Select Waypoint Button to display the keypad.
3) Select a waypoint as a direct-to destination:
Input the waypoint identifier using the keypad and touch the Enter Button to accept
the identifier, and return to the 'Direct To' Screen.
Or:
a) Touch the Find Button to display the 'Find Waypoint' Screen.
b) Touch the Search Tab to display the Search By Button.
c) If needed, touch the Search By Button to choose Search by City or Search by Facility.
d) Touch the Facility Name Button or the City Name Button to display the keypad.
e) Use the keypad to select the name.
f) Touch the Enter Button to accept the entry and display the search results.
g) Touch a Waypoint Selection Button to choose the waypoint as the direct-to
destination, and return to the 'Direct To' Screen.
4) To activate direct-to navigation:
Touch the Activate ¯ Button to activate the direct-to.
Or:
a) Touch the Activate and Insert in Flight Plan Button or the Insert in Flight Plan
Button (only available if the selected waypoint is not in the flight plan) to display the
'Insert and Activate ¯ <waypoint> Before?' Window.
b) Touch the Waypoint Selection Button to select the flight plan location to insert the
direct to waypoint, and to activate the direct-to.