Garmin CIRRUS PERSPECTIVE TOUCH+ - Surfacewatch (Optional); Surfacewatch Setup

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
152
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
Configuring SafeTaxi range:
1) From MFW Home, touch Map > Map Selection > Map Settings.
2) If not already selected, touch the Aviation Tab.
3) If necessary, scroll to display the SafeTaxi Range Button.
4) Touch the SafeTaxi Range Button. A selection of ranges are displayed.
5) Touch the desired range.
SURFACEWATCH (OPTIONAL)
WARNING: Do not use SurfaceWatch information as the primary method of flight
guidance during airborne or ground operations. SurfaceWatch does not have NOTAM
or ATIS information regarding the current active runway, condition, or information
about the position of hold lines.
NOTE: The SafeTaxi database must be available to provide information regarding
taxiways, aprons and other objects in the airport environment.
Enabling/disabling SurfaceWatch:
1) From MFW Home, touch Utilities > Setup > Avionics Settings.
2) If not already selected, touch the Alerts Tab and scroll to view the SurfaceWatch Inhibit
Button.
3) Touch the SurfaceWatch Inhibit Button to enable or disable SurfaceWatch. A green
annunciator indicates SurfaceWatch is inhibited, or disabled. The system message
‘SFC WATCH INHIB’ is also displayed in the ‘CAS’ Window indicating SurfaceWatch is
inhibited. The inhibit setting will be canceled after a power cycle.
SURFACEWATCH SETUP
Entering origin/destination airport when no flight plan has been entered:
1) From MFW Home, touch Flight Plan > Add Origin or Add Destination as appropriate.
2) Use the keypad to enter the Airport Identifier and touch Enter.
Selecting origin runway:
1) From MFW Home, touch Flight Plan > Origin.
2) On the ‘Select Runway’ Screen, scroll down as required and select the appropriate
runway.
Selecting destination runway:
1) From MFW Home, touch Flight Plan > Destination > Select Arrival Runway.
2) On the ‘Select Runway’ Screen, scroll down as required and select the appropriate
runway.