Garmin CIRRUS PERSPECTIVE TOUCH+ - Audio and Cns; Com Operation; COM Transceiver Selection and Activation; COM Frequency Tuning

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 23
Audio and CNS
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
AUDIO AND CNS
COM OPERATION
COM TRANSCEIVER SELECTION AND ACTIVATION
Selecting a COM Radio for transmission:
From NAV/COM Home, touch the MIC Button to switch between COM1 and COM2
radios.
Or:
1) From NAV/COM Home, touch the Audio & Radios Button to display the ‘Audio & Radios’
Screen.
2) Touch the COM1 or COM2 MIC Button.
Selecting a COM Radio for monitoring:
From NAV/COM Home, touch the MON Button to monitor the desired COM.
Or:
1) From NAV/COM Home, touch the Audio & Radios Button to display the ‘Audio & Radios’
Screen.
2) Touch the COM1 Button or COM2 Button.
COM FREQUENCY TUNING
Selecting a COM1 or COM2 frequency from the ‘NAV/COM Home’ Screen:
1) Touch the COM1 STBY Button or COM2 STBY Button to select for tuning.
2) Use the keypad to select the frequency.
3) Touch the Enter Button to accept the new frequency as the COM1 or COM2 standby
frequency (not required if tuning with the upper knobs).
4) Touch the XFER Button to accept the new frequency as the COM1 or COM2 active
frequency and transfer the previously active frequency to the standby frequency:
COM frequency tuning from the ‘Audio & Radios’ Screen using the COM Frequency Buttons:
1) From NAV/COM Home, touch the Audio & Radios Button to display the ‘Audio & Radios’
Screen.
2) Touch the COM1, or COM2 Frequency Button to display the COM1 or COM2 keypad.
3) Use the keypad to select the frequency.
4) Touch the Enter Button to accept the new frequency as the standby frequency:
COM frequency tuning from the ‘Audio & Radios’ Screen using the COM Volume Slider Buttons:
1) From NAV/COM Home, touch the Audio & Radios Button to display the ‘Audio & Radios’
Screen.
2) Touch the COM1 or COM2 Volume Slider Button to select that radio for tuning.