Garmin CIRRUS PERSPECTIVE TOUCH+ - Operation

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
138
Hazard Avoidance
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
Testing the Traffic System:
1) From MFW Home, touch Traffic > Traffic Settings.
2) Turn the lower knob on the GTC to adjust the map range to 2 NM for the inner range
ring, and 6 NM for the outer range ring. This ensures the full traffic test pattern is
depicted on the map.
3) If the traffic system is in Operating Mode, touch the Standby Button and the ADS-B
Display Button.
4) Touch the Home Button to return to the MFW Home screen.
5) From MFW Home, touch Aircraft Systems > System Test.
6) Touch the ADS-B Button.
OPERATION
Displaying the ‘Traffic Map’ Pane:
From MFW Home on the Touchscreen Controller, touch Traffic > Traffic Settings.
Or:
If the PFW is in Split Mode, press the Traffic Softkey or touch the Traffic Map Button
from PFW Home on the Touchscreen Controller.
Selecting an operating mode:
1) From MFW Home, touch Traffic > Traffic Settings.
Or:
a) From MFW Home, touch Map > Map Selection > Map Settings.
b) If not selected, touch the Sensor Tab.
c) Touch the Traffic Settings Button.
2) In the TCAS Mode Window, touch one of the following buttons:
• Operate: System interrogates other aircraft transponders and displays traffic.
• Standby: Traffic system does not interrogate other aircraft transponders or display
traffic.
Altitude Range
Changing the altitude range:
From MFW Home, touch Traffic > Traffic Settings.
Or:
1) From MFW Home, touch Map > Map Selection > Map Settings > Traffic Settings
Button.
2) Touch the Altitude Range Button: