Garmin CIRRUS PERSPECTIVE TOUCH+ - Auxiliary VIDEO (EVS); Stabilized Approach

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
178
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
Deleting document bookmarks:
1) With the desired document displayed, touch the Find Button to display the ‘Document
Viewer Find’ Screen.
2) Touch the Bookmark Tab.
3) Touch the X Button next to the bookmark to be deleted.
4) Touch the OK Button on the confirmation screen.
5) To acknowledge deletion of the bookmark, touch the OK Button.
AUXILIARY VIDEO (EVS)
NOTE: Auxiliary Video can only be displayed on the MFD.
Displaying auxiliary video:
From MFW Home, touch Aircraft Systems > Video. The ‘Video Settings’ Screen is
displayed on the Touchscreen Controller and Auxiliary Video is displayed on the selected
display pane.
Switching between full-screen and split-screen:
1) From MFW Home, touch Aircraft Systems > Video.
2) On the Touchscreen controller, touch the Half or Full Button on the Button Bar.
Zooming in and out:
1) From MFW Home, touch Aircraft Systems > Video.
2) Turn the lower right knob on the Touchscreen Controller to zoom in and out. Note the
‘ZOOM: 4x’ or
‘ZOOM: 1x’ notification on the ‘Video’ Screen after zooming in or out.
Adjusting video settings:
1) From MFW Home, touch Aircraft Systems > Video.
2) To adjust the brightness, contrast, or saturation, touch and slide the applicable slider.
Or:
Touch the + pointer to increase or the - pointer to decrease the setting.
3) Touch the Default Settings Button to return the video settings to the factory settings.
STABILIZED APPROACH
Inhibiting all stabilized approach alerts:
1) From MFW Home, touch Utilities > Setup > Avionics Settings.
2) Touch the Alerts Tab.
3) Touch the Stabilized APPR Inhibit Button to enable or disable Stabilized Approach
Alerts. A green annunciation in the button indicates Stabilized Approach Alerts are
inhibited.