Garmin CIRRUS PERSPECTIVE TOUCH+ - General Performance and Trip Planning; Datalink Weather for Performance Estimates; Trip Planning

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
98
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
4) Use the keypad to enter the item weight.
5) Touch the Enter Button to accept the entry, and return to the 'Weight and Balance'
Screen.
6) Repeat steps 3 - 5 as necessary.
Entering the fuel on board quantity:
1) From MFW Home, touch PERF > Weight and Balance.
2) Touch the Fuel Tab to display the fuel entry buttons.
3) Touch the Fuel Init Button to display the 'Initial Fuel' Screen.
4) Touch the Initial Fuel Button to display the 'Set Initial Gallons' Screen.
5) Use the keypad to enter the item quantity.
6) Touch the Enter Button to accept the entry, and return to the 'Initial Fuel' Screen.
7) Touch the Confirm Button to use the value for fuel calculations.
Or:
1) From MFW Home, touch PERF > Weight and Balance.
2) Touch the Fuel Tab to display the fuel entry buttons.
3) Touch the Fuel Init Button to display the 'Initial Fuel' Screen.
4) Touch the FOB SYNC Button. The fuel on board quantity is set to the current measured
fuel.
5) Touch the Confirm Button to use the value for fuel calculations.
Entering the taxi fuel quantity:
1) From MFW Home, touch PERF > Weight and Balance.
2) Touch the Fuel Tab to display the fuel entry buttons.
3) Touch the Taxi Fuel Button to display the entry keypad.
4) Use keypad to enter desired fuel allotment for taxi.
GENERAL PERFORMANCE AND TRIP PLANNING
DATALINK WEATHER FOR PERFORMANCE ESTIMATES
Changing the datalink wind and temperature source setting for general performance data:
1) From MFW Home, touch PERF > Datalink WX PERF.
2) A window is displayed showing the available datalink wind and temperature sources.
Touch the button for the desired datalink source.
TRIP PLANNING
Selecting the Stored Flight Plan – Cumulative trip route mode:
1) From MFW Home, touch Utilities > Trip Planning.