Garmin CIRRUS PERSPECTIVE TOUCH+ - Hazard Avoidance; Data Link Weather; Activating Data Link Weather Services; Registering the System for Garmin Connext Services

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 109
Hazard Avoidance
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
HAZARD AVOIDANCE
DATA LINK WEATHER
ACTIVATING DATA LINK WEATHER SERVICES
Establishing a SiriusXM Weather Data account:
1) From MFW Home, touch Utilities > Setup > SiriusXM Info.
2) Note the ID shown in the ‘Data Radio’ Window.
3) Contact SiriusXM customer service. Follow the instructions provided by SiriusXM
customer service.
Activating SiriusXM Weather services:
1) Position the aircraft so the GDL 69A SXM antenna has an unobstructed view of the sky,
away from buildings.
2) Connect aircraft to external power source if available.
3) Power on the avionics and allow the system to energize in normal mode.
4) For the GDL 69A SXM, service activation is performed automatically by the system.
5) To verify the correct subscription package, from MFD Home, touch Utilities > Setup >
SiriusXM Info.
6) On the ‘SiriusXM Info’ Screen, verify the correct subscription package is displayed in the
‘Service Class’ Window.
7) In the ‘Weather Products’ Window, scroll as needed to view available weather products.
Available weather products appear as white text (data has not been received); A green
check indicates the weather product data has been received and is available for use,
unavailable weather products appear in subdued (gray) text. It may take 45 - 60 minutes
before activation is complete and all subscribed-to weather products become available.
REGISTERING THE SYSTEM FOR GARMIN CONNEXT SERVICES
Registering the system to receive Garmin Connext Weather:
1) Ensure the aircraft is outside and has a clear view of the sky (if connecting through the
Iridium network).
2) From MFW Home, touch Utilities > Setup > Connext Settings. If the Registration
Information Window indicates ‘Not Registered’, continue with this procedure.
3) Touch the Register Tab.
4) Scroll as necessary and touch the Register Button
5) Use the keypad or large and small upper knobs to supply the access code provided from
Garmin Connext customer service.