Garmin CIRRUS PERSPECTIVE TOUCH+ - FLIGHT INSTRUMENTS; Airspeed Indicator

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 1
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight Instruments
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
FLIGHT INSTRUMENTS
FLIGHT INSTRUMENTS
AIRSPEED INDICATOR
Changing Vspeeds and enabling/disabling Vspeed Bugs:
1) From PFW Home, touch Speed Bugs.
2) Touch the General, Takeoff, or Landing Tab.
3) To enable or disable a Vspeed bug, touch the button for the Vspeed bug. The button
annunciation is green when the Vspeed bug is enabled and gray when disabled.
4) To change the Vrotate speed, touch the Vrotate Data Field and input a value using the
keypad or large and small upper knobs, then touch the Enter Button or push the small
upper knob. A pencil icon next to a Vspeed value indicates the Vspeed is a pilot-selected
value.
Or:
1) From MFW Home, touch PERF > Speed Bugs.
2) Touch the General, Takeoff, or Landing Tab.
3) To enable or disable a Vspeed bug, touch the button for the Vspeed bug. The button
annunciation is green when the Vspeed bug is enabled and gray when disabled.
4) To change the Vrotate speed, touch the Vrotate Data Field and input a value using the
keypad or large and small upper knobs, then touch the Enter Button or push the upper
knob. A pencil icon next to the Vspeed value indicates the Vspeed is a pilot-selected
value.
Enabling or disabling all General, Takeoff or Landing Vspeed bugs:
1) From PFW Home, touch Speed Bugs.
2) Touch the General, Takeoff, or Landing Tab.
3) To enable all Vspeed bugs, touch the All On Button.
4) To disable all Vspeed, touch the All Off Button.
Or:
1) From MFW Home, touch PERF > Speed Bugs.
2) Touch the General, Takeoff, or Landing Tab.
3) To enable all Vspeed bugs, touch the All On Button.
4) To disable all Vspeed, touch the All Off Button.