EasyManua.ls Logo

Garmin CIRRUS PERSPECTIVE TOUCH+ - Contacts

Garmin CIRRUS PERSPECTIVE TOUCH+
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 161
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
NOTE:
For Android devices, you must allow your device to share your contacts when
the connection is established. For Apple devices, you must first establish the Bluetooth
connection. Then on your PED, go into Bluetooth settings for the connected device
and allow contacts to sync.
CONTACTS
Creating a new stored contact:
1) From MFW Home, touch Services > Contacts. Touch the Stored Tab if not already
selected.
2) The ‘Contacts’ Screen is displayed.
3) Touch the Create New Button.
4) Touch the Name Button. The ‘Contact Name’ Entry Screen is displayed.
5) Enter the name of the new contact.
6) Touch the Enter Button.
7) If desired, touch the Favorite Button to designate the new contact as a favorite. A green
annunciator indicates the contact is now designated as a favorite.
8) Touch the Telephone Number Button. The ‘Phone Number’ Entry Screen is displayed.
9) Enter the telephone number of the new contact.
10) Touch the Enter Button.
11) Touch the Email Address Button (scroll down as required). The ‘Email Address’ Entry
Screen is displayed.
12) Enter the email address of the new contact.
13) Touch the Enter Button.
14) Touch the Create Button. The new contact is created and appears in the list of contacts.
If the contact was selected as a ‘Favorite,’ a star symbol will display on the right side of
the contact button to indicate this selection.
Viewing contacts from a Bluetooth connected PED:
1) From MFW Home, touch Services > Contacts.
2) Touch the Pilot Bluetooth Tab. Once a PED is connected to the system, contacts in this
tab will automatically populate.
Editing a contact:
1) From MFW Home, touch Services > Contacts. Touch the Stored Tab if not already
selected.
2) Touch the contact you desire to edit.
3) Touch the information field that you would like to edit.
4) When changes are complete, touch the Save Button.

Table of Contents

Related product manuals