Garmin CIRRUS PERSPECTIVE TOUCH+ - Takeoff and Landing Assistant (Tola); Accessing TOLA; Takeoff Data

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
100
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
4) Touch the starting waypoint button to display the 'Select Starting Location' Window.
5) Touch the Present Position Button to use the present position of the aircraft and return
to the 'Select Starting and Ending Locations' Window.
Or:
Touch the Waypoint Button to select a waypoint using the keypad and return to the
'Select Starting and Ending Locations' Window.
6) Touch the ending waypoint button to select a waypoint using the keypad and return to
the 'Select Starting and Ending Locations' Window.
7) Touch the Accept Button to select the mode and return to the 'Trip Planning' Screen.
When the manual entry mode is selected, the other eight trip input data fields must be en-
tered by the pilot, in addition to flight plan and leg selection.
Entering manual data for trip statistics calculations:
1) From MFW Home, touch Utilities > Trip Planning.
2) Touch the Manual Entry Button to enable the manual entry data field buttons.
3) Touch an input data field button and use the keypad to select the value.
4) Touch the Enter Button to accept the value and return to the 'Trip Planning' Screen.
5) Repeat Steps 3 and 4 for each of the data fields.
TAKEOFF AND LANDING ASSISTANT (TOLA)
ACCESSING TOLA
Accessing the 'Takeoff Data' Screen:
From MFW Home, touch PERF > Takeoff Data.
Accessing the 'Landing Data' Screen:
From MFW Home, touch PERF > Landing Data.
TAKEOFF DATA
Origin Tab
Manually selecting an origin airport and runway on the 'Takeoff Data' Screen:
1) From MFW Home, touch PERF > Takeoff Data to display the Origin Tab.
2) Touch the Origin Airport Button (may be displayed as six cyan dashes if empty) to display
the keypad.
3) Use the keypad to enter the origin airport.
4) Touch the Enter Button to accept the entry, and return to the 'Takeoff Data' Screen.
5) Touch the Runway Button to display the 'Select Runway' Screen.
6) Touch the desired Runway Selection Button, and return to the 'Takeoff Data' Screen.