Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 110

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
84
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
c) Touch the Remove Button. A 'Remove Departure – <departure identifier> from
flight plan?' Window is displayed.
Or:
a) From MFW Home, touch Flight Plan.
b) Touch the Departure Header Button to display the 'Departure Options' Window.
c) Touch the Remove Departure Button. A 'Remove Departure – <departure
identifier> from flight plan?' Window is displayed.
Or:
For the standby flight plan:
a) From MFW Home, touch Flight Plan > Standby Flight Plan > PROC.
b) Touch the Departure Button to display the 'Departure Selection' Screen.
c) Touch the Remove Button. A 'Remove Departure – <departure identifier> from
flight plan?' Window is displayed.
Or:
a) From MFW Home, touch Flight Plan > Standby Flight Plan.
b) Touch the Departure Header Button to display the 'Departure Options' Window.
c) Touch the Remove Departure Button. A 'Remove Departure – <departure
identifier> from flight plan?' Window is displayed.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button to display the 'Edit Stored Flight Plan' Screen.
d) Touch the Flight Plan Options Button to display the 'Flight Plan Options' Window.
e) Touch the Load Departure Button to display the 'Departure Selection' Screen.
f) Touch the Remove Button. A 'Remove Departure – <departure identifier> from
flight plan?' Window is displayed.
2) Touch the OK Button. The departure is removed from the flight plan.
WARNING: Never touch the Edit Runway Button while holding at a waypoint within
a departure or arrival procedure. Doing so will remove the holding pattern from the
flight plan, and the aircraft will fly its current heading without flying the remainder
of the flight plan.