Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 122

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
96
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
a) Touch the Flight Plan Options Button to display the 'Flight Plan Options' Window.
b) Touch the Load Approach Button to display the 'Approach Selection' Screen.
c) Touch the Remove Button. A 'Remove Approach – <approach identifier> from flight
plan?' Window is displayed.
5) Touch the OK Button. The approach is removed from the stored flight plan. To cancel the
request, touch the Cancel Button.
Missed Approach
Activating a missed approach in the active flight plan:
Press the Go-Around Button. The system begins automatic sequencing through the
missed approach waypoints to the MAHP. See the AFCS Section for more details.
Or:
Fly past the MAP and touch the SUSP Button on the PFW Home Screen or press the
SUSP Softkey on the PFW.
Or:
1) From MFW Home, touch PROC.
2) Touch the Activate Missed Approach Button to activate the missed approach. The
system begins automatic sequencing through the missed approach waypoints to the
MAHP. (The Activate Missed Approach Button is available after the leg to the FAF
becomes active and GPS is the active NAV source on the PFW.)
Or:
1) From MFW Home, touch Flight Plan.
2) Touch the Approach Header Button to display the 'Approach Options' Window.
3) Touch the Activate Missed Approach Button to activate the missed approach. The
system begins automatic sequencing through the missed approach waypoints to the
MAHP. (The Activate Missed Approach Button is available after the leg to the FAF
becomes active and GPS is the active NAV source on the PFW.)
Temperature Compensation
NOTE: The use of temperature compensated altitudes outside the final approach
segment will be coordinated with ATC.
Manually enabling/disabling temperature compensation for approach waypoint altitudes:
1) From MFW Home, touch Flight Plan > Flight Plan Options.
2) Touch the APPR WPT TEMP COMP Button to display the ‘Temp Compensation’ Screen.
3) Touch the Temp Compensation Annunciator Button to enable/disable temperature
compensation.