Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 131

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 105
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
b) Scroll the list if necessary and touch the button for the desired intersection or LAHSO
point.
Or:
a) Touch the Intersection Exit Button to display a list of intersections. Each
Intersection Button displays the name of the intersecting runway or taxiway, and the
landing distance available before that intersection.
b) Scroll the list if necessary and touch the button for the desired intersection takeoff.
Or:
a) Touch the Shorten DEP End Button to display the keypad.
b) Use the keypad to enter the reduction distance from the departure end of the runway.
c) Touch the Enter Button to accept the entry.
Or:
a) Touch the Landing Distance Available Button to display the keypad.
b) Use the keypad to enter the shortened landing distance available.
c) If a Departure runway had been selected, touch the DEP Button or APPR Button to
shorten the distance from the approach or departure end.
d) Touch the Enter Button to accept the entry.
Or:
a) Touch the Shorten APPR End Button to display the keypad.
b) Use the keypad to enter the reduction distance from the approach end of the runway.
c) Touch the Enter Button to accept the entry.
5) Repeat Step 4 until the landing runway available distance data is displayed correctly.
6) Touch the Save Button to make the changes and return to the 'Landing Data' Screen.
Entering the landing Runway Required distance:
1) From MFW Home, touch PERF > Landing Data.
2) Touch the Runway Tab.
3) Touch the Runway Required Button to display the keypad.
4) Use the keypad to enter the landing runway distance required.
5) Touch the Enter Button to accept the entry, and return to the Runway Tab.
Manually entering landing runway elevation, heading, or gradient:
1) From MFW Home, touch PERF > Landing Data.
2) Touch the Runway Tab.
3) Touch the Runway Elevation Button, Runway Heading Button, or the Runway
Gradient Button to display the keypad.
4) Use the keypad to enter the value.
5) Touch the Enter Button to accept the entry, and return to the 'Landing Data' Screen.