Garmin CIRRUS PERSPECTIVE TOUCH+ - ADDITIONAL FEATURES; SAFETAXI

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 125
Hazard Avoidance
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Temporary Flight Restrictions (TFRs)
Enabling/disabling TFR information (‘Data Link’ Weather Pane):
1) From MFW Home, touch Weather > Weather Selection > ‘Data Link’ Weather >
‘Data Link’ Weather Settings.
2) Scroll in the ‘Overlays’ Window as needed and touch the TFRs Button.
3) To view TFR text, push the lower knob to activate the map pointer and move the pointer
with the large and small upper knobs or Touchpad until the selected TFR is highlighted.
The TFR text appears near the map pointer for the selected TFR.
4) When finished, push either knob, or touch the Back Button or the Home Button.
Enabling/disabling TFR information on ‘Navigation Map’ Panes:
1) From MFW Home, touch Map > Map Selection > Map Settings.
2) If not selected, touch the Sensor Tab.
3) Scroll and touch the TFR Button.
Selecting the maximum map range to display TFR information:
1) From MFW Home, touch Map > Map Selection > Map Settings.
2) If not selected, touch the Sensor Tab.
3) Touch the TFR Range Button.
4) Scroll as necessary and touch the maximum navigation map range to display TFR
information.
PIREPs and AIREPs
Displaying PIREP or AIREP information:
1) From MFW Home, touch Weather > Weather Selection > ‘Data Link’ Weather >
‘Data Link’ Weather Settings.
2) Scroll in the ‘Overlays’ Window as needed and touch the AIREPs (SiriusXM only) or
PIREPs Buttons.
3) To view PIREP/AIREP text, push the lower knob to activate the map pointer and use the
large and small upper knobs or Touchpad to highlight a PIREP or AIREP symbol, then
touch the Info Button.
4) Scroll as needed through the report text, then touch the Back Button or the Home
Button.
SIGMETs and AIRMETs
Enabling/Disabling AIRMET and SIGMET information:
1) From MFW Home, touch Weather > Weather Selection > Data Link Weather > Data
Link Settings.