EasyManua.ls Logo

Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 263

Garmin CIRRUS PERSPECTIVE TOUCH+
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 237
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
System Message Comments
PFD1 ANNUNC INOP
PFD Annunciation Failure
PFD 1 annunciations are inoperative due to an internal error.
PFD1 CARD 1 ERR
PFD1 card 1 is invalid.
The SD card in the top card slot of the PFD contains invalid data.
PFD1 CARD 1 REM
PFD1 card 1 was removed.
Reinsert card.
The SD card was removed from the top card slot of the PFD. The SD card
needs to be reinserted.
PFD1 CARD 2 ERR
PFD1 card 2 is invalid.
The SD card in the bottom card slot of the PFD contains invalid data.
PFD1 CARD 2 REM
PFD1 card 2 was removed.
Reinsert card.
The SD card was removed from the bottom card slot of the PFD. The SD
card needs to be reinserted.
PFD1 CHK REQD: BTM
SD – Bottom SD card error.
The GDU bottom SD card is inoperative.
PFD1 CHK REQD: INT SD
– Internal SD card error.
The GDU internal SD card is inoperative.
PFD1 CHK REQD: TOP SD
Top SD card error.
The GDU top SD card is inoperative.
PFD1 CMC INOP: Config
– CMC system inop due to
invalid config.
The CMC system logging capability is inoperative due to file invalid
configuration.
PFD1 CMC INOP:
Corrupt – CMC INOP due
to file system corruption.
The CMC system logging capability is inoperative due to file system
corruption.
PFD1 CMC INOP: MEM
Full – Internal SD card full.
The CMC system logging capability is inoperative due to insufficient
memory.
PFD1 CONFIG – PFD1
config error. Config service
REQ’D.
The PFD configuration settings do not match backup configuration
memory. The system should be serviced.
PFD1 DB ERR – PFD1
[XXXX] database errors
exist.
The PFD detected a failure in more than one database. Reload databases
with new data card. If problem persists, delete databases and reload with
a new card.
PFD1 DB ERR – PFD1
obstacle database missing.
The obstacle database is present on another LRU, but is missing on the
specified LRU.
PFD1 DB ERR – PFD1
terrain database missing.
The terrain database is present on another LRU, but is missing on the
specified LRU.

Table of Contents

Related product manuals