Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 90

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
64
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
Or:
a) Touch the Flight Plan Button.
b) Touch any Waypoint Selection Button to open the 'Waypoint Options' Window.
c) Touch the Fix Function Button.
2) Touch the Edit Fixes Button.
3) Touch the desired Fix Button to be added.
4) Touch Edit > Insert Into Flight Plan.
5) Scroll the list as necessary, and touch the Waypoint Selection Button to select where to
insert the new waypoint. The waypoint is inserted into the active flight plan before the
selected waypoint.
Airways
Adding an individual airway to a flight plan:
1) For the active flight plan: From MFW Home, touch Flight Plan.
Or:
For the standby flight plan: From MFW Home, touch Flight Plan > Standby Flight Plan.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button to display the 'Edit Stored Flight Plan' Screen.
2) Scroll the list if necessary and touch a Waypoint Selection Button to display the 'Waypoint
Options' Window.
3) Touch the Load Airway Button to display the 'Airway Selection' Screen.
4) Touch the Sort A->Z Button to select/deselect alphabetical sorting of the airway
waypoints.
5) Scroll the list if necessary and touch an Airway Selection Button to select the airway and
display the 'Select Exit' Window (if Sort A->Z is selected, the exit points are displayed in
alphabetical order, not the order they appear in the airway).
6) Scroll the list if necessary and touch an Airway Exit Point Selection Button to select the
airway exit point. The airway waypoint sequence is now show on the 'Airway Selection'
Screen.
7) Touch the Show on Map Button to preview the airway on the active display pane.
8) Touch the Load Airway Button to insert the airway into the active or standby flight plan.