GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 3 - Installation 3-29
3-5-3 Connecting Probes
The Vivid™ 4 ultrasound unit operates with various types of probes that are used for scanning patients,
including flat phased, convex and linear electronic array probes. Once connected, the probes can be
selected for different applications.
There are four active probe connectors on the unit’s control panel (one connector is for a pencil probe).
Probes can be connected or changed any time, as described below:
1) Inspect the probe socket to verify that it is free of debris.
2) Hold the rectangular probe connector vertically so that the probe’s cable points upwards.
3) Rotate the probe locking latch counterclockwise to the unlock (horizontal) position.
4) Gently insert the connector into one of the matching sockets on the front of the unit. Gently push
the connector in as far as possible.
5) Rotate the locking latch 90 degrees clockwise to lock the connector into place (vertical).
NOTE: It is not necessary to turn OFF power to connect or disconnect a probe.
3-5-3-1 Available Probes
The following probes are available for use with the Vivid™ 4 ultrasound unit:
Table 3-15 Available Probes
P/N Description
2256686 Heart Sound Microphone
2259153 Probe: C358 (outside Japan)
E8386RK Biopsy Kit for C358
2301959 Probe: C721 (Curved)
2259206 Probe: I739L Linear
2323337 Probe: 3S Sector
2263669 Probe: 7S Sector
2290751 Probe: 5S Sector
2294523 Probe: 10L (739L) Linear
2295377 Probe: 39A (12L) Linear
E83885MM Biopsy Kit for 10L/12L
2298589 Probe: 10S
2259258 Probe: P509 (Japan)
2259246 Probe: T739L Linear
2294521 Probe: 7L (546L)
KN100068 Probe: 6T (Super TEE)
KN100023 Probe: 8T (PED TEE)
KN100072 Probe: 9T(PED TEE) (for RFI systems only)
KZ200476 Probe: Adaptor PAMPTE/6Tv
TY200774 Probe: Wall Rack TEE
TE100024 Probe: Pencil P2D
TQ100002 Probe: Pencil P6D
2301954 Probe: E721 OB/GYN
KQ100006 Probe: i8L Linear
KW100011 Probe: i13L Linear
To Next Page
Loading...
