GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
7-68 Section 7-3 - Performing Front End (FE) Diagnostics
7-3-11 Current Report
The H/W Report button in the FE Diagnostics dialog box enables you to generate a report of the current
test and failure results.
1) Access the FE Diagnostics dialog box, as described in the Accessing the Front End Diagnostic
Options section, on page 7-6.
2) Trackball to the Current Report button and press Select. The Current Report window is displayed,
as shown below:
Figure 7-44 Current Report Window
To Next Page
Loading...
