GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-67
7-3-10 H/W Report
The H/W Report button in the FE Diagnostics dialog box enables you to generate a report displaying
the Front End boards, software versions and hardware revisions.
1) Access the FE Diagnostics dialog box, as described in the Accessing the Front End Diagnostic
Options section, on page 7-6.
2) Trackball to the H/W Report button and press Select. The System Report window is displayed, as
shown in Figure 7-42 (or Figure 7-43) below:
Figure 7-42 System Report Window (RFI-configured Systems)
Figure 7-43 System Report Window (RFT-configured Systems)
To Next Page
Loading...
