GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-115
8-8-1-4 B&W Printer Installation Procedure
1.) Place the B/W Video Printer on the right side of the Vivid™ 4 ultrasound unit’s top surface (below
the control console - as shown in Figure 8-102) and next to the VCR (if present), allowing sufficient
room to access the cables at the rear of the printer.
Figure 8-101 B/W Video Printer, DIP Switches on the Rear Panel
Figure 8-102 B/W Video Printer Installed in the Vivid™ 4
All switches in DOWN position
B/W Video Printer
To Next Page
Loading...
