GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
7-88 Section 7-5 - Common Service Interface
Figure 7-59 Profile Manager Window
4) Select InSite from the Profile Name drop-down list to confirm the connection to the local host
OR
if you are running the application as a field engineer from a remote location, select Remote from
the Profile Name drop-down list.
5) Trackball to the Start Communicator button and press Select. Wait a while, until the Service Login
dialog box is displayed, as shown below:
Figure 7-60 Service Login Dialog Box
6) Select Operator from the Select User Level drop-down list, and in the Enter Password field, enter
the password supplied by the OLC (this is updated on a frequent basis).
Note: For a detailed description of the access and security levels, refer to the Access and Security
section, on page 7-90.
To Next Page
Loading...
