GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-81
Figure 7-54 Benchmark Testing Results
In the information displayed under CPU Description, Memory and Frame Rate, make sure that the
values displayed in the upper line (which indicates current computer results) are higher or equal to those
indicated in the lower line.
7-4-7-2 Check Disk/Bus
1) Access the HW Diagnostics menu, as described in the Accessing the Back End Diagnostic Options
section, on page 7-69.
2) Trackball to the Computer Testing button and press Select. The options shown in Figure 7-53 on
page 7-80 are displayed.
3) Trackball to the Check Disc/Bus button and press Select. The Disk/Bus Bench window is
displayed as shown in Figure 7-55 on page 7-82.
To Next Page
Loading...
