GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
3-16 Section 3-4 - Preparing for Installation
3-4-3-2 Front and Side View of the Vivid™ 4 Ultrasound Unit
Figure 3-11 below shows the Vivid™ 4 ultrasound unit components that are visible from the front and
side of the ultrasound unit.
1 Display Monitor: Swivels to the left and right, and tilts up and down.
2 Speakers: Two loudspeakers for Doppler sound.
3 Probe Holders and Probes: Situated on either side of the front panel.
4 Control Panel: Contains the alphanumeric keyboard and the buttons used to operate the ultrasound
unit.
5 Front Handle.
6 Raise/Lower the Control Console Up/Down/Swivel Handle: Located midway underneath the front
handle. Used to swivel (left or right) and raise or lower the control console (control panel and
monitor). Press the handle halfway for the swivel action, and all the way for the raising/lowering
action.
7 Air Filter: Located above the crate.
8 Probe Ports:
• Four active probe connectors (one for a pencil probe).
Figure 3-11 Front and Side View of the Vivid™ 4
1
2
3
4
6
7
8
9
11
12
14
17
15
16
18
19
13
Note: (10) Footswitch not illustrated
LEFT
RIGHT
5
To Next Page
Loading...
