GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 6 - Service Adjustments 6-11
Section 6-7
Calibration
The Diagnostic dialog box (accessed by pressing <Ctrl+F11> or <Alt+D>, when in regular scanning
mode), enables you to perform three types of calibration, as described in the following sections:
• Monitor Calibration section, page 6-13.
• Beamformer Calibration section, page 6-14.
• Video Grabbing Calibration section, page 6-14.
6-7-1 Accessing the Calibration Options
1) Press <Ctrl+F11> (or <Alt+D>) on the alphanumeric keyboard. The Diagnostic dialog box is
displayed, as shown below:
Figure 6-5 Diagnostic Dialog Box
To Next Page
Loading...
