GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
3-44 Section 3-6 - System Configuration
3-6-8 Printers Tab
1) Press Config on the alphanumeric keyboard. The System Configuration window is displayed.
2) Trackball to the Printers tab and press Select. The Printers tab is displayed, as shown below:
Figure 3-27 Printers Tab
Note: Please note, the printer indicated in the Currently Installed Printers field, is the
recommended and approved printer to be used with the Vivid™ 4 system. Other generic
printers are not approved, and GE Medical Systems will not guarantee their correct
operation on this system.
3) In the Currently Installed Printers area, trackball to the required printer and press Select. The
printer is highlighted.
4) Trackball to the Set as default button and press Select. The selected printer is set as the default
printer and is shown in the text box above the option buttons.
5) Trackball to the OK button and press Select.
Note: To test this option, verify that paper has been loaded and that the ink cartridge is installed.
Select any report and try to print it, verify that printing quality and information is satisfactory.
To Next Page
Loading...
