GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-107
7-5-4-4 Front End Diagnostics
When the Front End Diagnostics option is selected in the left pane of the Diagnostics page, the same
tests as those performed by pressing <Ctrl+F11> during regular operation, can be conducted. Both
Non-interactive (see Figure 7-81 [or Figure 7-82]) and Interactive (see Figure 7-83) tests may be
performed. However, the Interactive tests require the use of specific probes.
NOTE: To avoid failure alarms during the Front End diagnostics tests, disconnect all probes that are not
required to perform the test.
Figure 7-81 Non-Interactive Tests (Systems with RFI Configuration)
To Next Page
Loading...
