GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-139
8-8-6 HP 6540/3 USB Deskjet Color Printer Replacement Procedure for Vivid™ 4
BT03 Systems
NOTE: IMPORTANT - Whether the Vivid™ 4 system is currently using 4.3 or 4.6 software, it is necessary to
install the printer driver, as described in the HP 6540/3 USB Deskjet Color Printer Installation Procedure
below.
Figure 8-133 HP 6540/3 USB Deskjet Color Printer
The HP6540/3 Printer Kit (P/N: 2415435) contains the following items:
8-8-6-1 Tools
Use the appropriate flat and Phillips-type screw drivers.
8-8-6-2 Manpower
One person - 15 mins.
8-8-6-3 Preparations
1) Shut down the Vivid™ 4 ultrasound unit, as described in Chapter 3 - Installation.
2.) Remove the Connectors Panels Cover as described in the Connector Panels Cover Removal
Procedure on page 8 - 8.
3.) Carefully unpack the HP 6540/3 USB Printer.
4.) Check that the HP 6540/3 USB Printer AC voltage corresponds to that of your local voltage.
Item Part No. Description
2415380 HP6540 Printer
2415381-2 CD installation for HP-6540/3 Printer
2300847-3 Printer Power Cable
2415481-2 Installation Instructions
To Next Page
Loading...
