IP8820/IP8830/IP8840
Installer Guide
A-4
Config File
Section Name
Parameter/Field Default Value
Provisioning type TFTP
DHCP option 66/150 enabled
HTTPS URL Not assigned
HTTPS URL DHCP option 160
Use TFTP DHCP option enabled
Use HTTP/S DHCP option enabled
ID Not assigned
Password Not assigned
Phone specific file name* $MAC
HTTPS certification Authority, server name & expiration
Decryption key* Not assigned
Smart upgrade* Upgrade at midnight
Smart upgrade type Every time
Smary upgrade option Cfg and SW both download
S/W download flag enabled
Config download flag enabled
[PROVISION]
Remote Phonebook URL* Not assigned
[PROG] Flex buttons 1 & 2 private lines
Callnum in line** 3
Anonymous caller id block disabled
Call waiting enabled
Call waiting tone enabled
Call hold ringback tone enabled
Message waiting tone enabled
Auto answer disabled
Forwarding condition* 0 off
Forwarding address* Not assigned
Forwarding no-answer time* 10 seconds
Direct call* disabled
Direct call number* Not assigned
Direct call timer* 5 seconds
[CALL]
Send end-of-digit** enabled
NOTE: Parameters marked with an asterisk, , cannot be modified via the LCD Configuration
Menu. Parameters mark with double asterisk, , can only be modified using the configuration
file download.
To Next Page
Loading...