Genban IP8820 - Date Format; Time Format

IP8820/IP8830/IP8840
Installer Guide
45
Jan 17 4:32
DST Auto Adjustment
Current value is ‘Yes’
Next No
Y
es
Jan 17 4:32
Time Format
*24 HR (15:00)
Next OK
Previous
 Press the [Yes] softkey to enable DST Auto
Adjustment, or press the [No] softkey to disable
DST Auto Adjustment.
 Move to another parameter with the navigation
buttons and continue the session or press the Settings (
) button to exit the
configuration session.
3.6.6.4 Time Format
The format of the LCD time display can be set to display time in the 12-hour format or 24-hour
format. In addition, the LCD time display can be disabled.
To set the display format for time:
 Press the Settings (
) button.
 Press the
digit, or move the cursor to 3.Phone Settings using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 6.Time Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 4.Time Format using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Press the [Next]-[Previous] softkeys to select the
Time Format and press the [OK] softkey to set the
format.
 Move to another parameter with the navigation
buttons and continue the session or press the Settings (
) button to exit the
configuration session.
An asterisk, , displays in front of the current selection.
3.6.6.5 Date Format
The format of the LCD date displays in the one of the formats below:
MM/DD (01/22)
DD/MM (22/01)
DD Month (22 Jan)
Month DD (Jan 22)
None
To set the date display format:
 Press the Settings (
) button.
 Press the
digit, or move the cursor to 3.Phone Settings using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 6.Time Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.