Genban IP8820 - Proxy Registration; Register Expires; VMS Address

IP8820/IP8830/IP8840
Installer Guide
36
Jan 17 4:32
Proxy Registration
Current value is ‘Yes’
Clear No
Yes
Jan 17 4:32
Register Expires
3600
Clear OK

3.5.2.7 Proxy Registration
If Proxy Registration is set to [Yes], the IP Phone will register with the appropriate call or proxy
server upon initial power-up, during a reboot and at periodic intervals based on the timer defined
in section 3.5.2.8
.
To enable Proxy Registration:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure.
Refer to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 Press the
button, or move the cursor to 8.Proxy Registration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 To enable registration, press the [Yes] softkey or,
to disable SIP registration, press the [No] softkey.
 Move to another parameter with the navigation
buttons and continue the session or press the
Settings (
) button to exit the configuration
session.
3.5.2.8 Register Expires
To assure a connection with the proxy or SIP call server, the IP Phone periodically re-registers.
Unless defined by the host server during registration, the Register Expires timer determines the
interval between registration attempts and is set from 0 to 6400 seconds, default 3600 seconds.
To modify the Register Expires timer:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure.
Refer to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 9.Register Expires using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Input the registration expiration time using the dial
pad and press the [OK] softkey to save your entry.
 Move to another parameter with the navigation
buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.5.2.9 VMS Address
The Voice Mail Server (VMS) address is the IP address or phone number of the user’s voice
mail system.
To assign the VMS Address: