IP8820/IP8830/IP8840
Installer Guide
73
4.4 Call Preferences
Figure 4.4-1 Call Preferences
The IP Phone supports various user preferences as listed below.
- Call Preferences
o Caller ID Blocking
enables and disables blocking the outgoing caller id. When
enabled, the IP Phone sends the anonymous id.
o Anonymous Call Block
, when enabled, blocks incoming calls with an anonymous
caller id.
o Call Waiting Function,
when enabled, visually notifies the user of an incoming call
while in a conversation. If disable, when in a conversation, a new call is refused
and the call server routes the call.
o Call Waiting Tone,
when the IP Phone is in use with call waiting enabled, a beep
tone delivered over the existing call indicates an incoming call.
o Call Hold Ringback
, when enabled, rings the phone if the user returns to idle with
a call on hold.
To Next Page
Loading...