IP8820/IP8830/IP8840
Installer Guide
74
o Message Waiting Tone, when enabled, stutter dial tone notifies the user a new
message is waiting. Stutter dial tone notification is in addition to the visual flashing
Message LED notification.
o Auto Answer
, when enabled, will activate the speakerphone or headset
automatically if an incoming call is received.
- Call Forwarding
o Conditions
define the condition for Call Forward (Busy, No-Answer, Busy & No-
Answer, unconditional, or not used).
o Address to Forward
defines the destination to receive forwarded calls.
o No-Answer Time
sets the delay for no-answer forward.
- Direct Call (Hotline/Warm-Line)
o Direct Call
, when enabled, places a call to a predefined destination automatically
when the phone goes off hook.
o Direct Call Number
defines the destination for a direct call.
o Direct Call Timer
sets a delay timer for Warm-Line operation. The timer specifies
the period before placing a direct call. The timer is set in 1 second increments
from zero (0) to ten (10) seconds. For Hotline operation, set the timer to zero (0)
seconds.
To modify parameters on the Call Preferences screen:
Select the desired parameter and enter new values, or select values from the drop-down
menus.
When complete, select the
button to load new values to the IP Phone memory.
To Next Page
Loading...