EasyManua.ls Logo

Genban IP8820 - Primary DNS Address; Secondary DNS Address

Genban IP8820
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP8820/IP8830/IP8840
Installer Guide
20
Jan 17 4:32
Default Gateway
192.168.0.1
Clear OK
Jan 17 4:32
Enter Primary DNS
192.168.0.1
Clear OK
Press the digit, or move the cursor to 4.Default Gateway using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Input the Default Gateway IP address using the dial
pad and press the [OK] softkey to save your entry.
Move to another parameter with the navigation
buttons and continue the session or press the
Settings (
) button to exit the configuration
session.
The Default Gateway address can be changed only in static mode and not if DHCP
mode is active. In DHCP mode, the IP phone retrieves a default gateway address from
the DHCP server.
Changing the Default Gateway address requires a reboot of the IP phone; when you
leave the menu, you will receive a reboot notice. The IP phone must reboot to utilize
the new values entered.
3.4.5 Primary DNS Address
Using an FQDN (Fully Qualified Domain Name) for any of the servers in the IP phone
configuration requires entry of a primary DNS IP address. The IP phone contacts the primary
DNS server to resolve the FQDN to an IP address.
To assign the Primary DNS Address:
Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure.
Refer to section 3.3
.
Press the
digit, or move the cursor to 1.Network Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
Press the
digit, or move the cursor to 5.Primary DNS Address using the [Next]-
[Previous] softkeys and press the [OK] softkey.
Input the Primary DNS Address using the dial pad
and press the [OK] softkey to save your entry.
Move to another parameter with the navigation
buttons and continue the session or press the
Settings (
) button to exit the configuration
session.
Changing the Primary DNS Address requires a reboot of the IP phone; when you leave
the menu, you will receive a reboot notice. The IP phone must reboot to utilize the new
values entered.
3.4.6 Secondary DNS Address
With an FQDN assigned as any of the servers in the IP phone configuration, the IP phone
contacts the primary DNS server to resolve the FQDN to an IP address. Should the primary not

Table of Contents