es
Jan 17 4:32
DHCP Option
*Option 66/150, 160 both
Next OK
Previous
Press the [Yes] softkey to enable the Configuration
Download, or press the [No] softkey to disable the
Configuration Download.
Move to another parameter with the navigation
buttons and continue the session or press the Settings (
) button to exit the
configuration session.
Changing the Config Download Flag requires a reboot of the IP Phone; when you leave
the menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
3.6.7.6 DHCP Option
The IP Phone supports DHCP Options 66 & 150 (TFTP server) and a custom Option, default
160, for the HTTP/HTTPS URL to define the provisioning server. In some situations, it is useful
to disable use of the DHCP Options.
To set the DHCP Options flag:
Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure.
Refer to section 3.3
.
Press the
digit, or move the cursor to 3.Phone Settings using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Press the
digit, or move the cursor to 7.S/W Update using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Press the
digit, or move the cursor to 6.DHCP Option using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Select the DHCP Option desired using [Next]-
[Previous] softkeys and press the [OK] softkey to
save the entry. Options available include “Don’t
use any Option”, “Option 66/150 only”, “Option 160
only” and “Option 66/150, 160 both”.
Move to another parameter with the navigation buttons and continue the session or press
the Settings (
) button to exit the configuration session.
Changing the DCHP Options requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
An asterisk, , displays in front of the current selection.
3.6.8 Lock Outgoing Call
The IP Phone can be configured to allow outgoing calls only if a password is entered. When
enabled, the LCD screen will display the password request as shown and the password must be
entered prior to connecting for outgoing call.
To Next Page
Loading...