Genban IP8820 - Authentication User Name

IP8820/IP8830/IP8840
Installer Guide
28
Jan 17 4:32
Enter Name
Rich
Mode OK

Jan 17 4:32
Enter Auth. User Name
5551234
Mode OK

 Enter the line button number or move the cursor using the [Next]-[Previous] softkeys and
press the [OK] softkey to select a line button.
 Press the
digit, or move the cursor to 4.Name using the [Next]-[Previous] softkeys
and press the [OK] softkey.
 Input the Name using the dial pad and press the
[OK] softkey to save your entry.
 Move to another parameter with the navigation
buttons and continue the session or press the
Settings (
) button to exit the configuration
session.
To enter alphanumeric characters select the [Mode] softkey. Refer to Appendix E
for
the character mapping of dial pad digits.
3.5.1.5 Authentication User Name
Authentication of the line appearance with the SIP call server uses the Authentication User
Name.
To assign the Authentication User Name:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure.
Refer to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 1.Line Configuration using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 Enter the line button number or move the cursor using the [Next]-[Previous] softkeys and
press the [OK] softkey to select a line button.
 Press the
digit, or move the cursor to 5.Auth. Username using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Input the Authentication User Name using the dial
pad and press the [OK] softkey to save your entry.
 Move to another parameter with the navigation
buttons and continue the session or press the
Settings (
) button to exit the configuration
session.
To enter alphanumeric characters select the [Mode] softkey. Refer to Appendix E
for
the character mapping of dial pad digits.
Do not assign an Authorization Name or Password when the line type is DSS/BLF.