Genban IP8820 - S;W Update; Provisioning Type

IP8820/IP8830/IP8840
Installer Guide
46
Jan 17 4:32
Date Format
*MM/DD (02/18)
Next OK
Previous
Jan 17 4:32
Provisioning Type
*TFTP
Next OK
Previous
 Press the digit, or move the cursor to 5.Date Format using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Press the [Next]-[Previous] softkeys to select the
display format and press the [OK] softkey to set
the format.
 Move to another parameter with the navigation
buttons and continue the session or press the Settings (
) button to exit the
configuration session.
An asterisk, , displays in front of the current selection.
3.6.7 S/W Update
Within the S/W Update selection, the type of provisioning (TFTP/HTTPS), the Server Address,
HTTPS Verification settings and DHCP Options can be viewed and changed.
3.6.7.1 Provisioning Type
The IP8820/IP8830/IP8840 supports two provisioning protocols:
- Trivial File Transfer Protocol (TFTP) – a simple transfer mechanism using UDP but
lacks security and TFTP ports are often blocked at firewalls.
- Hyper-Text Transfer Protocol/Secure (HTTP/S) – employs TCP and using SSL
(Secure Sockets Layer) encryption is a more secure method. In addition, ports
employed by HTTPS are commonly available.
To assign the provisioning protocol:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure.
Refer to section 3.3
.
 Press the
digit, or move the cursor to 3.Phone Settings using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 7.S/W Update using the [Next]-[Previous]
softkeys and press the [OK] softkey.
 Press the
digit, or move the cursor to 1.Provisioning Type using the [Next]-
[Previous] softkeys and press the [OK] softkey.
 Select the Provisioning Type (TFTP or HTTPS)
using the [Next]-[Previous] softkeys and press the
[OK] softkey to save your entry.
 Move to another parameter with the navigation
buttons and continue the session or press the Settings (
) button to exit the
configuration session.
Changing the Provisioning Type requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
An asterisk, , displays in front of the current selection.