IP8820/IP8830/IP8840
Installer Guide
H-1
Appendix H. IP8830 and IP 8840 Icons
The IP8830 and IP8840 display various icons in the upper line of the LCD to assist the user in
understanding the status of the phone. In addition, for the IP8840 an icon associated with each
flexible button assigned as a line displays to indicate the status of the line. Below is a list of
icons and their meaning.
Upper line icons
LAN or Network connection icon indicates the status of the LAN connection to the IP
Phone. If the icon is blinking, the LAN connection is faulty. This icon displays as the
first icon on the left.
PC Port icon, when displayed, indicates a device, generally, a PC is connected to the
PC port of the IP Phone.
RSSI icon indicates the signal strength received by the WiFi Module. The RSSI levels
indications are:
No WiFi icon indicates the wireless network is not connected.
Only one of the following Bluetooth icons may display based on status.
Bluetooth module icon indicates the optional Bluetooth module is installed with no paired
headsets. When blinking, the IP Phone is searching or attempting to pair with a headset.
Bluetooth paired icon indicates one or more (maximum 5) headsets are paired with the
module but none are active. When blinking the IP Phone is attempting to pair or connect
a headset
Bluetooth connected icon indicates headset is connected to IP Phone. When blinking
rapidly, the IP Phone is searching or attempting to pair or disconnect a headset. When
blinking slowly, the Bluetooth headset is in use.
Forward icon indicates calls to the extension are forwarded.
Message icon indicates one or more messages waiting in Voice Mail.
DND icon indicates the IP Phone is in DND and will not notify you of incoming calls.
To Next Page
Loading...