IP8820/IP8830/IP8840
Installer Guide
42
Jan 17 4:32
Press Flexible Button
Clear No
Yes
Jan 17 4:32
(07) Select Function
*No Function
Next OK
Previous
Jan 17 4:32
(07) Enter Number
5559988
Mode OK
Table 3.6.5-1 Flexible Button Functions
Feature Description
0 No Function Unassigned
1 Speed Dial Function Dials the assigned number
2 Phone Book Function Views the personal phone book
3 Call Log Function Views the call log list
4 Mute Function Toggles the Mute feature on and off
5 Headset Function Toggles the Headset on and off
6 Redial Function Dials the last number dialed by the user.
7 Return Call Function Dials the number of the last answered call
8 Set Call Forwarding Sets the call forwarding configuration
9 Conference Function
1. Initiates a conference call
2. Joins calls in a conference
10 Transfer Function Initiates a call transfer
11 Hold Function Places an active call on hold
12 Do not disturb Toggles the DND on and off
13 Set Ringer Off Toggles the ringer on and off
14 Message Function Views the number of new and old messages stored in
the Voice Mail server, and dials the Voice Mail server by
pressing the [Dial] softkey
To assign a function to a flexible button:
Press the Settings (
) button.
Press the
digit, or move the cursor to 3.Phone Settings using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Press the
digit, or move the cursor to 5.Flexible Button using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Select the desired flexible button.
Select a function using the [Next]-[Previous] soft
key and press the [OK] softkey. Refer to the Table
3.6.5-1 Flexible Button Functions.
If the selected function is Speed dial or Message,
enter the speed number or voice mail number and
press the [OK] softkey.
To Next Page
Loading...