Genban IP8820 - Page 86

IP8820/IP8830/IP8840
Installer Guide
79
 Assure the Digit Map radial button is selected under the Dial Plan Type
 Enter the desired values into the Digit Map (Routing) box.
 Select the
button.
To set-up or change a Digit Map to provide second dial-tone
 Enter the digits in the Digit Map (2
nd
Dial Tone) box.
 Click the
button.
To modify a Digit Map process:
 Enter the digits in the Digit Map (Process) boxes.
 Click the
button.
To delete a Digit Map process:
 Select the DEL check box.
 Click the
button.