IP8820/IP8830/IP8840
Installer Guide
92
If the IP Phone finds a new version of software during the smart upgrade, the IP
Phone either downloads the file or displays the availability of the new version and
awaits user confirmation to download. To await user confirmation, check the
“when new found, confirm downloading” box.
To modify the upgrade configuration:
Select the parameter and enter the new value, select a value from the drop-down menu or
select the check box.
When finished, select the
button.
If the “Received by DHCP on boot” box is checked, then an address entered into the
TFTP server address or HTTPS URL is ignored and only the server information
retrieved from the DHCP server is used.
The radial button next to the provisioning server type (TFTP or HTTPS), must be
checked. If no type is selected, file download is disabled.
Changes made to the Upgrade screen require a reboot of the IP Phone. When you
leave the menu, you will receive a Reboot notice. The IP Phone must reboot to utilize
the new values entered.
To Next Page
Loading...