3-67
Chapter 3 Settings and Measurement
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
Setting Description
WEB Servers Settings Web server function Off, On
Port Number 0 to 65535
Basic authentication Off, On
User name Enter up to 31-character string
Password Enter up to 31-character string
Mail Settings
E-mail Send Settings
Account
settings
Email address Enter up to 63-character string
Destination
settings
To Enter up to 63-character string
CC1 Enter up to 63-character string
CC2 Enter up to 63-character string
CC3 Enter up to 63-character string
Subject. Enter up to 63-character string
E-mail Send Server Settings
Easy setting Arbitrary, Simple send, gmail, yahoo.co.jp, yahoo.com, Office365
Send (SMTP) Server Name Enter up to 63-character string
SMTP port number 0 to 65535
Time zone UTC-12:00 to UTC+13:00
SMTP setting SMTP authentication method Off, SMTP-AUTH
SMTP-AUTH PLAIN, LOGIN, CRAM-MD5
SMTP user name Enter up to 63-character string
SMTP password Enter up to 63-character string
SMTP encryption PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5
Test email Execute a test send.
Notification settings
Alarm Off, On
Screen copy attachment Off, On
Low Battery Off, On
Low signal strength Off, On
Disk Error Off, On
Periodic notification Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours, specified time
Specified
time
Hour 0 to 23
Minute 0 to 59
Second 0 to 59
Screen copy attachment Off, On
G-REMOTE setting User name Enter up to 31-character string
Password Enter up to 31-character string
Keep Alive Off, 10 seconds, 30 seconds, 1 minute, 10 minutes, 30 minutes, 1 hour
Connection confirmation Check the connection with the G-REMOTE server.
Network time settings Interface Time Off, On
NTP Server Enter up to 127-character string
Time zone UTC-12:00 to UTC+13:00
Synchronization Time 00:00 to 23:59
Adjust Mode Synchronize at once, Synchronize gradually
Connection Test Execute a connection test with the NTP server.
Log settings Communication Off, Wireless LAN, Wired LAN
*The packet log will be saved to the file displayed.
G-REMOTE Off, On
To Next Page
Loading...
