106 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Messages from the microcopter sensor are displayed in the bottom
line in the above display.
BAT
This display visualizes the current voltage, the currently flowing cur-
rent and the capacity consumed within the current switch-on period
from the battery connected to the Electric Air Module (No. 33620).
SENSOR 1 and SENSOR 2
These two displays visualize, if necessary, the connection to "T (EMP)
1" and / or "T (EMP) 2" of the Electric Air module (No. 33620) con-
nected to the temperature / voltage sensors (No. 33612 or 33613).
Vario
This display shows the data about altitude in meters related to launch
so as the the current climb/sink rate in m/s, from the vario integrated
in the Electric Air Module (No. 33620) .
Speed display
In base on the related sensors this display shows the current speed
on the ground.
"lowest cell"
According to the availability of the corresponding sensor, this display
shows the currently lowest cell voltage of a battery pack as well as
the number of the relevant cell.
0.0V
0.0A
0mAh
0.0V
0°C
SENSOR 1
To Next Page
Loading...
Need help?
General