EasyManuals Logo

GRAUPNER mz-12 PRO User Manual

GRAUPNER mz-12 PRO
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
61 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Speed controller setting
After the option "ESC on C8" has been activated in the line with
"yes", the rotor speed to be maintained by the controller can now
be specified in a phase-specific manner by changing the % value in
this line.
The adjustment range is 0 to 100%.
Programming step-by-step
1. Push the ENT key to activate the value field.
2. Use the selection buttons to set the desired value or, by pressing
the left and right selection buttons simultaneously, reset the cur-
rent value to the default value.
3. Press the ENT or ESC key to complete the input.
Phase
Select the desired menu with the selection buttons, then press the
ENT button again to recall the selection list of the menu.
Push the ESC key to stop the procedure.
Phase setting (copter)
Push the ENT key to recall the setting page of this menu.
As long as no switch is assigned to phase 2 or phase 3, the transmit-


the «normal» phase is not displayed as phase 1, but remains hidden.
It should also be pointed out that the phases are preceded by prior-
-
ment of individual switches. The underlying scheme can be described
as follows:
If all the phase switches that are assigned are closed or open, the

If only one switch is closed, then the phase which is assigned to

  

"Phase 2" is preceded by the phase name "Start" and "Phase 3" by
-
lows.
normal
0%Gyro suppression
0%
Gyro
OFF
SP limit
ESC at C8
no
ESC setting 50%
Model
memory
D/R
Expo
Tx
setting
Ctl
setting
Channel
setting
M.OFF
timers
C1
curve
+
Phase
Phase setting
Phase trim
Phasentrimmung
=>
=>
=>
=>
=>
Phase 2
Phase 3
Start
Speed
–––
–––

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GRAUPNER mz-12 PRO and is the answer not in the manual?

GRAUPNER mz-12 PRO Specifications

General IconGeneral
BrandGRAUPNER
Modelmz-12 PRO
CategoryRadio
LanguageEnglish

Related product manuals