GRAUPNER mz-12 PRO User Manual

67 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Battery alarm threshold
In this line, the warning threshold of the undervoltage warning is set
in 0.1 volt steps between 3.4 and 4.2 V.
Make sure that the set value is not too low to give you sufficient time
to land your model after a battery warning.
Attention
The transmitter mz-12 Pro HoTT is designed for operation only with
a single-cell LiPo battery.
Key reaction
The response to the key press of the left and right keypad is set in
this line.
The setting range is from 1 (fast response) to 10 (slow response).
Contrast
Individual setting of the display contrast.
The adjustment range is from -20 to +20.
Display light
In this line, specify how long the background lighting of the display
remains on after turning on the transmitter or since a control ele-
ment has been actuated.
RF Region
The region setting is necessary to meet various guidelines (FCC, ETSI,
IC etc.).
It is therefore always appropriate to switch between "America" and
"Europe".
Voice volume
In this line the volume of the voice announces is set.
The setting acts on the built-in speaker and the earphone connector.
The adjustment range is from 0 to 5.
Signal volume
In this line the volume of the signals is set.
The setting acts on the built-in speaker and the earphone connector.
The adjustment range is from 0 to 5.
Battery alarm threshold
Key reaction
Contrast
Display light
RF Region
2
3.4V
0
Europe
always
Battery alarm threshold
Keay reaction
Contrast
Display light
RF Region
2
3.4V
0
Europe
always
Battery alarm threshold
Key reaction
Contrast
Display light
RF Region
2
3.4V
0
Europe
always
Voice volume
Key reaction
Contrast
Display light
RF Region
2
3
0
Europe
always
Voice volume
Contrast
Display light
RF Region
3
0
Europe
always
Signal volume
3

GRAUPNER mz-12 PRO Specifications

General

Brand	GRAUPNER
Model	mz-12 PRO
Category	Radio
Language	English