34 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Phase setting (helicopter)
Push the ENT key to recall the setting page of this menu.
Push the ESC key to stop the procedure.
-
which is why the «normal» phase is not displayed as phase 1, but
remains hidden.
It should also be pointed out that the phases are preceded by prior-
-
ment of individual switches. The underlying scheme can be described
as follows:
• If all the phase switches that are assigned are closed or open, the
• If only one switch is closed, then the phase which is assigned to
• The "autorotation phase" ALWAYS takes precedence over all
other phases.
Programming the phase name step-by-step
1. Push the ENT key.
2. Select a suitable phase name among the ones appearing in the
list.
3. Press the ENT key to complete the operation.
As soon as one switch is activated in the right column or in the line
"Autorotation" of the "Model type" menu, the name of the respec-
tive active phase is displayed in the basic display as well as in all
menus where phase settings are adjustable and all phase-depen-
dent settings made in the respective active phase are active.
Model type
Phase setting
Phasentrimmung
=>
=>
=>
=>
=>
Phase 2
Phase 3
hovering
Speed
–––
–––
To Next Page
Loading...
Need help?
General