110 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Speed display
In base on the related sensors this display shows the current speed
on the ground.
AIR ESC
This display shows the data from a HoTT compatible brushless con-
troller connected to the receiver with internal telemetry.
Regardless of possible controller values, the operating temperature
and the maximum temperature of a telemetry-capable electric
motor reached during the current switch-on period are visualized in
the second line of the display.
The abbreviations have the following meaning (from top to bottom
starting on the left):
Value Description
V Left value: current battery charge
Right value: lowest battery level since the device
has been switched on
°C Left value: current controller temperature
Value in brackets: maximum controller tempera-
ture since the device has been switched on
mAh Used battery charge since the device has been
turned on
A Central and column indicators: actual current
Right value: maximum current since the device
has been switched on
rpm Central and column indicators: rpm of the con-
nected motor
Right value: maximum rpm since the device has
been switched on
Rpm indicator
This indicator shows the actual rpm of the motor connected to the
brushless speed controller.
Note
For a correct speed specification, the correct number of poles of the
motor connected must first be set in the setting menu of the con-
troller.
0
km/h
RX–S QUA: 100%
RX–S ST : 100%
TX–dBm: 33dBm
RX–dBm: 33dBm
RX–SPG.:4.8 TMP
V–PACK: 10ms
CH OUTPUT TYPE:ONCE
RECEIVER
GENERAL
ELECTRIC AIR
VARIO
GPS
AIR ESC
0
0
0rpm
0.0A
0.0A
0
0mAh
0( 0)°C
0.0V/ 0.0V
RPM
To Next Page
Loading...
