75 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Default setting
• Confirming the "NO" setting by pressing the ENT key will quit the
operation.
• Pressing the ENT key after changing to "YES" resets the transmit-
ter to the factory settings.
All model memories and other settings are erased and copter
model memories programmed at the factory are restored.
RFID
Firmwarevers.
Werkseinstellung
1.234
FA-AA-AA-A9-9F
=>
Initialization?
YES
NO
To Next Page
Loading...
