16 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Receiver assignation
The servos must be connected to the receiver in the indicated
sequence. Not assigned outputs remain free.
Details about the receiver power supply can be found in the related
receiver system manual.
Fixed-wing models
Motor-powered airplanes and glider models
with up to 2 aileron servos and 2 flap servos
Tail type "normal" or with "2 EL servos"
receiver power supply
free or AILERON2 left or special function
free or AILERON2 right or special function
rudder
AILERON or AILERON left
elevator or elevator1
free or 2nd elevator or special function
receiver power supply
Airbrake or engine servo or electric drive controller
AILERON right or special function
FLAP of FLAP left
FLAP right or free or special function
free or FLAP2 left or special function
free or FLAP2 right or special function
receiver power supply
free or special function
free or special function
AILERON or AILERON left
free or special function
receiver power supply
airbrake or engine servo or electric drive controller
AILERON right or special function
FLAP or FLAP left
FLAP right or free or special function
free or FLAP2 left or special function
free or FLAP2 right or special function
elevator/rudder left
elevator/rudder right
To Next Page
Loading...
Need help?
General